Health and FitnessHome Improvement

Learn how to clean the linear drain and preserve the environment

The linear drain has become a big trend in the decoration of residential and commercial projects and has been much sought after by both architecture and decoration professionals and by end customers. You will find different options  that enhance the spaces even more.

What many people don’t know is that maintenance is very important, as cleaning is the best way to ensure perfect drainage and also contributes to reducing water pollution. In common models, all this dirt goes into the sewer and causes two very serious problems: the possibility of clogging your siphon box, which can result in costs, work and breakage for much more impactful cleaning, and the disposal of several waste in the water, where sewage often ends up. In addition, drains that do not have a Retaining Grill can cause another very common problem in bathrooms: bad smell. Hair together with body fat and soap residues causes a bad smell when they accumulate inside the siphon box.

Here are some tips to keep the linear drain cleaning up to date:

Keep the base clean

Those who choose to install a linear drain in bathrooms, washrooms, balconies, leisure areas, and other rooms. It have already been noticed that cleaning the base is maintenance that must be done together with normal bathroom cleaning, due to the accumulation of waste in the ask.

The part is made up of a lid – which can be stainless steel or a covered sub-lid in the case of hidden models –, a base and also optional safety devices, such as the Retainer Grille. In the case of  Linear products, there is also, a device that keeps the exit to the siphon box closed, opening only with the flow of water. For Drain Cleaning Click Here

This means that various residues, such as hair, animal hair, leaves, and even jewelry that eventually fall out during the bath, will be retained under the lid. All this material would go to the sewer before, not only causing clogging but also contributing to pollution, as it makes the treatment of effluents difficult.

Step by Step to clean:

1) Remove the cover/sub-cover using the suction cup provided when purchasing the part. The suction cup must be used for displacement of the cap/sub-cover. After moving, support it with your hands. This way you avoid any damage to the product’s finish;
2) Remove the Retaining Grid from inside the base and discard the residues in the trash, never in the toilet. So this dirt does not go into the sewer system;
Also, remove and clean the Drain Closer;
Clean the cover/sub-cover and the base of the drain with neutral and non-abrasive products, as they can leave stains;
Removing the cover is the only additional action in this process when comparing the linear drain with common models

How often should the drain be cleaned?

The frequency varies depending on the usage of the environment. Bathrooms used daily by the whole family, for example, will need weekly cleaning. Spaces that are rarely used. Just keep an eye on the water drainage process. When there is a little puddled water, it is time to do the cleaning.

Stuart Strauss

I am Full time Plumber Offering services in USA

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button